Air Eliminators
There is no question in our opinion: these are the most reliable air eliminators money can buy. Stainless steel float and mechanism, Viton A seal, 3/4” NPT in and out. (1/2” on special order), 1/16” air outlet orifice operates up to 208 psi. Air release rate at 150 psi is 6.04 cfm. Larger orifice sizes: 3 available on special order but operating pressures decrease. Structural pressure rating is 250 psi on all models. Repairable replacement parts are available.
STAINLESS STEEL MODEL – High Air Flow
Non-repairable. At 150 psi, releases air at 9.44 cfm. Maximum operation pressure 400 psi. Structural pressure rating 500 psi.
Socket Adapter for Coalescer Elements
Designed to fit threaded bottom coalescer elements. The socket is 1/2” square drive for torque wrenches and extensions. This adapter is needed to attach a torque wrench to coalescer elements.
Check Valves
Prevents drain-back
To be installed above the air eliminator
Viton seal – all stainless steel
Designed to fit threaded bottom coalescer elements. The socket is 1/2” square drive for torque wrenches and extensions. This adapter is needed to attach a torque wrench to coalescer elements.
Pressure Relief Valves
Relieves excess pressure caused by thermal expansion of the fuel. Be sure to specify relief pressure setting.
Note: 150psi is our standard pressure relief valve setting. Other settings are special order and are non-refundable.
