Bulletin 173: SkyHawk Overwing Nozzle - Gammon Technical Products

Weighs only 5 1/4 pounds

100 % Made in the USA

Maximum Test Pressure: 150psi

Maximum Flow Rate: 100 gpm

Five Year Limited Warranty

Heavy duty 1 1/2″ NPT swivel inlet
Quick change swiveling spout design – QD type
Inexpensive to repair – all seals independently replaceable
Easy operation, fingertip sensitivity, and adjustable closing speed
Swivel interlock compatible design
Survived 16 months in a continuous duty test at a major international airport
Rugged polyurethane handle guard with side protection
Seals well to -50°F and compatible with all aviation fuels, bio diesel, and jet
Spout dust covers and retainer are polyurethane
No plastic components (except PTFE poppet bushing), no cast metal parts, 300 series stainless steel shaft and fasteners
Spout storage holder available (for second spout)
GTP-9644 check valve available when ordering or as a retrofit.

GTP-9363-25A
spout storage holder

Safely Recirculate Overwing Hoses with the SkyHawk Recirculation Adapter

JM-9647
SkyHawk recirculation adapter

In the past, recirculation of your overwing nozzles required climbing on top of the truck. Aside from the potential for the operator falling, you can also damage the nozzle by dropping it, and in addition, splashing fuel into the tank is a static fire hazard.

The SkyHawk Recirculation Adapter (patent pending) solves this problem. Simply disconnect the standard spout and connect the JM-9647 adapter to the SkyHawk nozzle. Then connect it directly to the bottom load adapter on the truck.

Squeeze the trigger and recirculate at up to 100 gpm. The only downside is that upon disconnection, you need to catch about 3 oz of fuel from the adapter. Dual interlocks help prevent accidental disconnection.

Replacing your bottom load dust cap? We include an inlet dust cap and lanyards so you can replace the existing (or missing) bottom load dust cap with the SkyHawk Recirculation Adapter, making it a high quality solid aluminum dust cap as well as a recirculation adapter!

Uses a genuine Meggitt (Whittaker) F117 nose seal for excellent sealing integrity. (P/N 2713509)

Constructed of 100% aviation grade aluminum with S/S trim and, of course, manufactured by GTP in the USA.

NOTE: This does not make the SkyHawk overwing nozzle into an underwing nozzle, it is meant only for recirculation purposes.

How to Order the SkyHawk Overwing Nozzle

Examples
GTP-9363-AB-P:	Nozzle with both of the 1½ inch spouts with BSP swivel on inlet.
GTP-9363-V-RH:	Nozzle with no spouts, a check valve, and a red handle.