McCabe Water Finding Paste

To find the level of water in a tank, wipe a thin film of paste on a gauging stick and lower it to the bottom of the tank. When you remove the stick, the green paste will change color where it is contacted by water. The water level will show in red. Packaged in 3.75oz (106g) jars.

GTP-982-1
single jar of paste

GTP-982-12
12 jars of paste

GTP-982-144
144jars of paste

Kolor Kut Water Finding Paste

Changes from golden brown to red. 3oz tube.

Modified Water Finding Paste (MIL-W83779)

For fuel with anti-icing additive. Changes from dark brown to red. 2.5oz tube.

Kolor Kut Fuel Indicating Paste

Fuel Indicating Paste shows fuel level in a tank. Wipe a thin film of paste on a gauging stick and lower it to the bottom of the tank. When you remove the stick, the lavender-colored paste will change color where it is contacted by fuel. The fuel level will show as red. Packaged in 2.25oz (62g) jars.

Syringes for Shell Water Detector Test

We offer two sizes of high-quality syringes for performing Shell water detector testing. 5mL or 10mL.

Safety Wire

Quality stainless steel safety wire. Annealed (softened) for easy use. Dispenses neatly from top of 1 lb. box.

Safety wire
.025″ or .032″

GTP-1924-2
automatic safety wire twisting tool

Dummy Monitor Elements
GTP-8697

When reducing the number of elements, a “dummy” or non-functional element can be used to fill unnecessary element mounts. Our “dummy” elements are carefully machined from high grade aluminum and designed to replace any brand of 2” outside diameter element in any vessel. The seal is a Viton o-ring. Includes an adjustable center “rest” to allow easy installation in vessels with element aligning guides. Needs no additional hardware, works with cover interlocks. Available in standard 10″, 20″, or 30″ sizes, or custom order.

Special Lubricants

Aviation-grade Swivel and Seal Lube
GTP-9188

Gammon Technical has packed this industry-accepted, FDA food-grade (CFR 172.880) petrolatum in handy 14.5 oz tubes, designed to fit standard grease guns, but can also be used on the bench.

StaticLube
TL-9653

StaticLube is a lubricant specifically designed to conduct electricity. It is made with a high-quality synthetic lubricant and filled with super-fine silver for electrical conductivity. It is not silicone based. It is highly thermally conductive to help protect bearings. It blocks corrosion and protects bearing surfaces from water.

StaticLube can also be used on electrical connections and is especially helpful when bonding a static reel to steel framework-creating a long-lasting electrical bond virtually immune to corrosion and weather.

StaticLube comes in 1cc syringes, which will lubricate up to three static reels. Made in the USA.